Southern Pacific Transportation Company

Southern Pacific Transportation Company

SP system map (before the 1988 DRGW merger)
Reporting mark SP
Locale Arizona, Arkansas, California, Colorado, Illinois, Kansas, Louisiana, Missouri, Nevada, New Mexico, Oklahoma, Oregon, Tennessee, Texas, Utah
Dates of operation 1865–1996
Successor Union Pacific
Track gauge ft 8 12 in (1,435 mm) with some 3 feet (910 mm) gauge branches
Headquarters San Francisco, California

The Southern Pacific Transportation Company (reporting mark SP), earlier Southern Pacific Railroad and Southern Pacific Company, and usually simply called the Southern Pacific or (from the railroad's initials) Espee, was an American railroad.

The railroad was founded as a land holding company in 1865, later acquiring the Central Pacific Railroad by lease. By 1900, the Southern Pacific Company had grown into a major railroad system which incorporated many smaller companies, such as the Texas and New Orleans Railroad and Morgan's Louisiana and Texas Railroad, and which extended from New Orleans through Texas to El Paso, across New Mexico and through Tucson, to Los Angeles, throughout most of California including San Francisco and Sacramento; it also included the Central Pacific Railroad extending eastward across Nevada to Ogden, Utah and had lines reaching north throughout and across Oregon to Portland.

The Southern Pacific had noticeable social impact along its route: some towns prospered because of it and it founded a number of important hospitals in, among other places, San Francisco and Tucson. Southern Pacific's total route mileage has varied significantly over the years. In 1929, the system showed 13,848 miles (22,286 km) (on its own); before the D&RGW merger Southern Pacific's mileage had dropped to 10,423 miles (16,774 km), mainly due to the pruning of branchline mileage. But by combining the mileage of subsidiary, St. Louis Southwestern Railway (Cotton Belt), SP system mileage totaled around 13,508 miles (21,739 km). This was because the Cotton Belt had almost doubled in size to 3,085 miles (4,965 km) with the purchase of the Golden State Route.

The takeover of Southern Pacific by Rio Grande Industries, along with the addition of the SPCSL Corporation route from Chicago to St. Louis, swelled the combined D&RGW/SP/SSW system to 15,959 miles (25,684 km). By the time of the merger with the Union Pacific Railroad, SP's mileage had once again dropped, with the entire SP system comprising 13,715 miles (22,072 km). While the Cotton Belt is the most famous of Southern Pacific's subsidiaries, SP owned many others like the Northwestern Pacific Railroad at 328 miles (528 km), the 1,331 miles (2,142 km) Southern Pacific Railroad of Mexico, and a variety of narrow gauge routes.

On August 9, 1988, the Interstate Commerce Commission approved the purchase of the Southern Pacific by Rio Grande Industries, the company that controlled the Denver and Rio Grande Western Railroad. The Rio Grande officially took control of the Southern Pacific on October 13, 1988. After the purchase, the combined railroad kept the Southern Pacific name due to its brand recognition in the railroad industry and with customers of both constituent railroads. The Southern Pacific subsequently was taken over by the Union Pacific Railroad in 1996 following years of financial problems. The railroad is also noteworthy for being the defendant in the landmark 1886 United States Supreme Court case Santa Clara County v. Southern Pacific Railroad which is often interpreted as having established certain corporate rights under the Constitution of the United States.

Contents

Timeline

Locomotive paint and appearance

Like most railroads, the SP painted the majority of its steam locomotive fleet black during the 20th century, but after the 1930s the SP had a policy of painting the front of the locomotive's smokebox light silver (almost white in appearance), with graphite colored sides, for visibility.

As locomotives are being restored, some Pacific type 4-6-2 locomotive boilers are showing signs of having been painted dark green. The soft cover book "Steam Glory 2" by Kalmbach Publications (2007) has an article "Southern Pacific's Painted Ladies" which shows color photos from the 1940s and 1950s revealing that a number of SP 0-6-0 yard engines, usually assigned to passenger terminals were painted in various combinations with red cab roof and cab doors, pale silver smokeboxes and smokebox fronts, dark green boilers, multi colored SP heralds on black cab, green cylinder covers and other details pointed out in color. It is possible that some of the other SP steam passenger locomotives were also painted in these colors or at least had dark green boilers. The article indicates that these paint jobs lasted quite a while and were not special paint for a single event.

Some express passenger steam locomotives bore the Daylight scheme, named after the trains they hauled, most of which had the word Daylight in the train name. This scheme, carried in full on the tender, consisted of a bright, almost vermilion red on the top and bottom thirds, with the center third being a bright orange. The parts were separated with thin white bands. Some of the color continued along the locomotive. The most famous "Daylight" locomotives were the GS-4 steam locomotives. The most famous Daylight-hauled trains were the Coast Daylight and the Sunset Limited.

Well known were the Southern Pacific's unique "cab-forward" steam locomotives. These were essentially 2-8-8-4 locomotives set up to run in reverse, with the tender attached to the smokebox end of the locomotive. Southern Pacific used a number of snow sheds in mountain terrain, and locomotive crews nearly asphyxiated from smoke blowing back to the cab. After a number of engineers began running their engines in reverse (pushing the tender), Southern Pacific asked Baldwin Locomotive Works to produce cab-forward designs. No other North American railroad ordered cab-forward locomotives, which became a distinctive symbol of the Southern Pacific.

During the early days of diesel locomotive use, they were also painted black. Yard switchers had diagonal orange stripes painted on the ends for visibility, earning this scheme the nickname of Tiger Stripe. Road freight units were generally painted in a black scheme with a red band at the bottom of the car body and a silver and orange "winged" nose. The words "SOUTHERN PACIFIC" were borne in a large serif font in white. This paint scheme is called the Black Widow scheme by railfans. A transitory scheme, of all-over black with orange "winged" nose, was called the Halloween scheme. Few locomotives were painted in this scheme and few photos of it exist.

Most passenger units were painted originally in the Daylight scheme as described above, though some were painted red on top, silver below for use on the Golden State (operated in cooperation with the Chicago, Rock Island and Pacific Railroad) between Chicago and Los Angeles. Also, silver cars with a narrow red band at the top were used for the Sunset Limited and other trains into Texas. In 1959 SP standardized on a paint scheme of black with a red "winged" nose; this scheme was dubbed Bloody Nose by railfans. Lettering was again in white. During the failed Southern Pacific Santa Fe Railroad merger in the mid 1980s, the "Kodachrome" paint scheme (named for the colors of the Kodak boxes that the film came in) was applied to many Southern Pacific locomotives. When the Southern Pacific Santa Fe merger was denied by the Interstate Commerce Commission, the Kodachrome units were not immediately repainted, some even lasting up to the Southern Pacific's end as an independent company. The Interstate Commerce Commission's decision left Southern Pacific in a decrepit state, the locomotives were not repainted immediately, although some were repainted into the Bloody Nose scheme as they were overhauled after months to years of deferred maintenance. After the 1988 purchase of Southern Pacific by Denver and Rio Grande Western Railroad owner Philip Anschutz, the side lettering on repainted locomotives was changed from SP's serif font to the Rio Grande's "speed lettering" style. The Rio Grande did not retain its identity, as Anschutz felt the Southern Pacific name was the more dominant and recognizable.

Southern Pacific road switcher diesels were well known by railfans for several distinct features beyond their paint schemes. The units often featured elaborate lighting clusters, both front and rear, which featured a large red Mars Light for emergency signaling, and often two sets of twin sealed-beam headlamps, one on top of the cab between the number boards, and the other below the Mars Light on the locomotive's nose. The Southern Pacific, starting in the 1970s, employed cab air conditioning on all new locomotives, and the air conditioning unit on top of the locomotive cab is quite visible. Southern Pacific also placed very large snowplows on the pilots of their road switchers, primarily for the heavy winter snowfall encountered on the Donner Pass route. Many Southern Pacific road switchers used a Nathan-AirChime model M3 or M5 air horn, which formed chords which were distinct to Southern Pacific locomotives in the western states.

The Southern Pacific, and its subsidiary Cotton Belt, were the only operators of the EMD SD45T-2 "Tunnel Motor" locomotive. This locomotive was necessary because the standard configuration EMD SD45 could not get a sufficient amount of cool air into the diesel locomotive's radiator while working Southern Pacific's extensive snow shed and tunnel system in the Cascades and Donner Pass. These "Tunnel Motors" were essentially EMD SD45-2's with radiator air intakes located at the locomotive car body's walkway level, rather than EMD's typical radiator setup with fans on the locomotive's long hood roof pulling air through radiators mounted at the top/side of the locomotive's body. Inside tunnels and snow sheds, the hot exhaust gases from lead units would accumulate near the top of the tunnel or snow shed, and be drawn into the radiators of trailing EMD (non-tunnel motor) locomotives, leading these locomotives to shut down as their diesel prime mover overheated. The Southern Pacific also operated EMD SD40T-2s, as did the Denver and Rio Grande Western Railroad.

One thing Southern Pacific Railroad was historic and recognized for was their "L Windows". These windows were where the engineer would drive and instead of having two pillars, Southern Pacific decided to remove one from the engineers side to give better visibility. Although after the idea of Wide Cabs came to play, most of Southern Pacific's Railroad kept their L windows before being rebuilt or sold to different private railroads after its merger. A lot of railfans consider it odd but at the same time a nice view since Southern Pacific is the only freight railroad to actually carry locomotives with L windows. In later years, due to safety standards coming into effect, the L window was considerably a safe window allowing visibility more distant then with the beam or T joint. Locomotives that were distinct to have L Windows were EMD 645 prime movers such as the EMD SD45, EMD SD45T-2, EMD SD40T-2, and GP locomotives, or General Purpose. Today, most locomotives with cabs that are not Wide Cabs use the 2 beams due to the railroad's decision. Most Railfans now consider finding any locomotive with L windows a nice treat to see because the fact that it gave the locomotive distinction and better looks. Southern Pacific Railroad had about 65% to 80% of their fleet with "L Windows" from the 1960s until its merge with Union Pacific and to this day. Some Southern Pacific locomotives that made it to UPRR are still intact with the "L Windows" but have been patched to UPRR's logo or locomotive number.

Unlike many other railroads, whose locomotive number boards bore the locomotive's number, SP used them for the train number until 1967, when they adopted the other railroads' "standard," except for the SP's San Francisco-San Jose commute trains, which maintained the display of train numbers for the convenience of passengers awaiting their trains. The other major railroad which used locomotive number boards for train numbers into the late 1960s was SP's transcontinental partner, Union Pacific.

Toward the end of the railroad's corporate life, Southern Pacific locomotives were known for being very dirty. Some railfans jokingly observed that the railroad's heavily used locomotives were only washed when it rained.

Union Pacific recently unveiled UP 1996, the sixth and final of its Heritage Series EMD SD70ACe locomotives. Its paint scheme appears to be based on the Daylight and Black Widow schemes.

Passenger train service

Until May 1, 1971 (when Amtrak took over long-distance passenger operations in the United States), the Southern Pacific at various times operated the following named passenger trains. Trains with names in italicized bold text still operate under the Amtrak name:

Locomotives Used for Passenger Service

Steam Locomotives

Diesel Locomotives

Notable accidents

Preserved locomotives

There are many Southern Pacific locomotives still in revenue service with railroads such as the Union Pacific Railroad, and many older and special locomotives have been donated to parks and museums, or continue operating on scenic or tourist railroads. Most of the engines now in use with Union Pacific have been "patched," where the SP logo on the front is replaced by a Union Pacific shield, and new numbers are applied over the old numbers with a Union Pacific sticker, however some engines remain in Southern Pacific "bloody nose" paint. Among the more notable equipment is:

For a complete list, see: List of preserved Southern Pacific Railroad rolling stock.

Company officers

Presidents of the Southern Pacific Company

Chairmen of the Southern Pacific Company Executive Committee

Chairmen of the Southern Pacific Company Board of Directors

Predecessor and subsidiary railroads

Arizona

California

New Mexico

Oregon

Texas

Mexico

Successor railroads

Arizona

California

Oregon

Ferry service

The Central Pacific Railroad (and later the Southern Pacific) maintained and operated a fleet of ferry boats that connected Oakland with San Francisco by water. For this purpose, a massive pier, the Oakland Long Wharf, was built out into San Francisco Bay in the 1870s which served both local and mainline passengers. Early on, the Central Pacific gained control of the existing ferry lines for the purpose of linking the northern rail lines with those from the south and east; during the late 1860s the company purchased nearly every bayside plot in Oakland, creating what author and historian Oscar Lewis described as a "wall around the waterfront" that put the town’s fate squarely in the hands of the corporation. Competitors for ferry passengers or dock space were ruthlessly run out of business, and not even stage coach lines could escape the group's notice, or wrath.

By 1930, the Southern Pacific owned the world's largest ferry fleet (which was subsidized by other railroad activities), carrying 40 million passengers and 60 million vehicles annually aboard 43 vessels. However, the opening of the San Francisco – Oakland Bay Bridge in 1936 initiated the slow decline in demand for ferry service, and by 1951 only 6 ships remained active. SP ferry service was discontinued altogether in 1958.

Notable employees

See also

References

Notes

  1. ^ <Please add first missing authors to populate metadata.> (August 9 1976). "Short and Significant: SP wins Dow safety award". Railway Age (Simmons-Boardman Publishing Corporation) 177 (14): p 8. 
  2. ^ a b Schwantes, Carlos A. (1993). Railroad Signatures across the Pacific Northwest. University of Washington Press, Seattle, WA. ISBN 0-295-97210-6. OCLC 27266208. 
  3. ^ San Bernardino Sun, San Bernardino, California, 29 March 1907.
  4. ^ OERM.org
  5. ^ Not the Gould Western Pacific of 1903
  6. ^ http://www.craigsrailroadpages.com/ptc/page2.htm

External links